JW Winco

Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

GN 5860 Load Rings

Photo

GN 5860 Load Rings

Product description

Information

Load rings GN 5860 rotate running in ball bearings. The freely rotating ring allows the bolts to hold loads in any tensile direction.

The rated load-bearing capacity is shown clearly on the load ring. It is valid for the most unfavourable case in terms of the types of load listed opposite. Load rings GN 5860 comply with Machine Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

The operating instruction contains further guidelines and is included with every load ring (see also at www.ganternorm.com/en/service).

Specification

Chain ring
Steel 1.6540

  • High-tensile tempered
  • 100% electro magnetic tensile tested
  • Powder coated, pink

Eye ring
Steel 1.6541

  • Forged
  • High-tensile tempered
  • 100% electro magnetic tensile tested
  • Powder coated, pink

Bearing case
Steel 1.6541

  • Forged
  • High-tensile tempered
  • 100% electro magnetic tensile tested
  • Zinc plated, blue passivated

Screw
Steel
Property strength class 10.9
Finish: Delta Tone


RoHS

On request

Other screw lengths

Technical drawing

3D
Hide technical drawing
GN 5860 Load Rings sketch

Article options / Table

Show / Hide columns
d1Length leh1h2h3h4k1k2k3k4A/FTightening
torque
in Nm
Nominal
Load
in t
M 8133084763145845294427100.30
M 10173486783147845294430100.45
M 12214211710749581055356536100.60
M 16254812711446681364386541301.30
M 20336215013754831361357755702.00
M 2440811911736610718764094701503.50
M 30509924322190131229450126852255.00

Build & Price

Open 3D configurator
Thread d1
Length l

Load capacity

Method of
mounting

Drawing GN 581 Table Drawing GN 581 Table2 Drawing GN 581 Table3 Drawing GN 581 Table4 Drawing GN 581 Table5 Drawing GN 581 Table6 Drawing GN 581 Table7 Drawing GN 581 Table8

Number

1

1

2

2

2

2

2

3 and 4

3 and 4

3 and 4

Angles of
inclination

0° to 7°

90°

0° to 7°

90°

0° to 45°

45° to 60°

asymm.


to
45°

45° to 60°

asymm.

Factor

1

1

2

2

1,4

1

1

2,1

1,5

1

M 8

0.60 t

0.30 t

1.20 t

0.60 t

0.42 t

0.30 t

0.30 t

0.63 t

0.45 t

0.30 t

M 10

0.90 t

0.45 t

1.80 t

0.90 t

0.63 t

0.40 t

0.40 t

0.94 t

0.67 t

0.40 t

M 12

1.20 t

0.60 t

2.40 t

1.20 t

0.84 t

0.60 t

0.60 t

1.26 t

0.90 t

0.60 t

M 16

2.60 t

1.30 t

5.20 t

2.60 t

1.82 t

1.30 t

1.30 t

2.73 t

1.95 t

1.30 t

M 20

4.00 t

2.00 t

8.00 t

4.00 t

2.80 t

2.00 t

2.00 t

4.25 t

3.00 t

2.00 t

M 24

7.00 t

3.50 t

14.00 t

7.00 t

4.90 t

3.50 t

3.50 t

7.35 t

5.25 t

3.50 t

M 30

10.00 t

5.00 t

20.00 t

10.00 t

7.00 t

5.00 t

5.00 t

10.50 t

7.50 t

5.00 t

Safety instructions

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +100 °C, with a safety coefficient of 4
taken into account for all values.
The load ring GN 5860 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.
If permanently mounted in place, the swivel eye bolt must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load rings are not suitable for permanent rotary movement under load exposure.
The operating instruction contains further guidelines and is included with every load ring.

Drawing GN 5860

Selected Part (How to order)

Total (net)
105,75
plus VAT 20,09 €
gross 125,84 €
In stock
Weight: 0,170 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 50,00 €
All prices in accordance with our price list No. 55, valid from 1 September 2022, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 5860-M8-13GN 5860-M10-17GN 5860-M12-21GN 5860-M16-25GN 5860-M20-33GN 5860-M24-40GN 5860-M30-50

This could also be interesting...

Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM:

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.