Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
With indexing plungers GN 722.5, the plunger pin is actuated via the latch. This is done either manually, with a cable or by means of an extended pull rod with hook. The stainless steel version A4 is suitable for use in particularly aggressive environments.
The type with rest position is used when the plunger pin should temporarily not protrude. For this purpose, the latch is turned sideways after the locking pin has been retracted. The latch is held in this position by the catch rececess at the top of the guide.
The dimensional tolerances between the pin and the guide have been chosen to ensure functional reliability even in roughly dimensioned applications or in the event of soiling.
There are several options for fastening. The hexagonal mounting holes allow the use of socket cap screws DIN 912 and hex screws or nuts according to DIN 931 or DIN 934.
Guide
Stainless steel precision castingA4 AISI 316
Latch
Stainless steel precision casting AISI 316
Plunger pin
Stainless steel AISI 316
Pressure spring
Stainless steel AISI 316Ti
RoHS
| E | With latch, with rest position |
| d1 Pin -0,05/-0,25 Bore +0,1/+0,3 | s | d2 +0,3 | h1 | h2 | l1 ≈ | l2 | l3 | l5 | l6 | m | A/F | Spring load in N ≈ Initial | End |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 10 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 12 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 14 | 20 | 6,1 | 7,5 | 1,5 | 54 | 14 | 35 | 37 | 48 | 34 | 10 | 14 | 35 |
| 16 | 30 | 10,1 | 15 | 5 | 83 | 20 | 54 | 55 | 80 | 55 | 17 | 22 | 70 |
| 20 | 30 | 10,1 | 15 | 5 | 83 | 20 | 54 | 55 | 80 | 55 | 17 | 22 | 70 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
